Patch Request: Commodo - So Familia (Trance-Like Lead)

Patch / Preset Recreated

At the drop at 0:17 in

There's a lead synth and a synth in the background playing repeated chord notes, they both have very similar if not identical tones so either is fine. I managed to get it close but not quite as round as in the song. I'm using a korg prologue 16 so any advice specific to that would be incredible but any help in general is greatly appreciated.
Thanks

yetispaghetti

4 years ago

Activity
yetispaghetti

I love you and whoever made that video

0    4 years ago    Reply

Comment must be at least 20 characters.
Cancel

Please use markdown for styling

Maria Gabriela Ruiz

BEHOLD!
A video explaining exactly how this patch was recreated

0    4 years ago    Reply

Comment must be at least 20 characters.
Cancel

Please use markdown for styling

yetispaghetti

I like the vibe of this patch. Kind of rhodes-esque. Try this:

Oscillator: Saw

Filter: Low Pass 24 dB, with a little Drive, and Key Tracking enabled. Bring the Cutoff down until you get the desired roundness.

Amp Envelope: Create a piano shape by bringing the Sustain down and setting the Decay and Release to medium long, around 1.2 seconds.

Velocity: Route it to volume, and play the higher repeating note louder than the lower notes. Also, if your synth allows, route the velocity to the Amp Envelope attack as well. Set the Attack to around 120 ms, and then set the Velocity modulation amount to a negative value that brings the Attack down to zero. Now, the harder notes (higher velocity) will have a sharper attack transient, and softer notes will have a softer attack transient.

NOTE: if you can’t route velocity to amp attack, instead create a second copy of the patch for the lower notes, and set their amp attack to around 120 ms.

Thanks so much for the help I really appreciate it, got very close to the sound I wanted, again thanks a lot I've seen you help lots of other people with patch requests and just want to say it is greatly appreciated.

0    4 years ago    Reply

Comment must be at least 20 characters.
Cancel

Please use markdown for styling

Joe Hanley

I like the vibe of this patch. Kind of rhodes-esque. Try this:

Oscillator: Saw

Filter: Low Pass 24 dB, with a little Drive, and Key Tracking enabled. Bring the Cutoff down until you get the desired roundness.

Amp Envelope: Create a piano shape by bringing the Sustain down and setting the Decay and Release to medium long, around 1.2 seconds.

Velocity: Route it to volume, and play the higher repeating note louder than the lower notes. Also, if your synth allows, route the velocity to the Amp Envelope attack as well. Set the Attack to around 120 ms, and then set the Velocity modulation amount to a negative value that brings the Attack down to zero. Now, the harder notes (higher velocity) will have a sharper attack transient, and softer notes will have a softer attack transient.

NOTE: if you can't route velocity to amp attack, instead create a second copy of the patch for the lower notes, and set their amp attack to around 120 ms.

0    4 years ago    Reply

Comment must be at least 20 characters.
Cancel

Please use markdown for styling

3 votes
Categories
Synth Patch / Preset Request